ZF 0501315198 Seal Ring 32x42x5 mm – Genuine ZF Gearbox Parts Trusted ZF Parts Supplier
- 24/7 order processing with DHL/FedEx express options.
- In-stock availability for urgent repairs.
- Free technical guidance on installation and compatibility
- P/N:0501315198
ZF 0501315198 Seal Ring 32x42x5 mm – Precision Oil Sealing for ZF Transmissions
Maintain optimal lubrication and prevent fluid leakage in your ZF automatic gearbox with the genuine ZF 0501315198 Seal Ring (32x42x5 mm) — a high-performance radial shaft seal engineered for reliable sealing under extreme operating conditions.
Product Overview
| Feature | Specification |
|---|---|
| Part Number | ZF 0501315198 |
| Description | Radial Shaft Seal / Seal Ring |
| Dimensions | 32 mm (ID) × 42 mm (OD) × 5 mm (Thickness) |
| Size Notation | 32x42x5 mm |
| Material | NBR (Nitrile Butadiene Rubber) + Garter Spring |
| Temperature Range | -40°C to +120°C (-40°F to +248°F) |
| Application | ZF Automatic Transmissions (e.g., Ecomat 4/5/6, TraXon) |
| Function | Prevent oil leakage at shaft interfaces |
| OEM Standard | Meets ZF original design and durability specs |
| Condition | New, factory-packed, never installed |
Installation Tip:
Lubricate Before Installation: Always apply a thin layer of clean transmission oil or grease to the seal lip and outer edge before installation. This prevents dry running and damage during startup.
Use Proper Installation Tool: Never hammer the seal directly. Use a proper seal driver tool or hydraulic press to seat the ZF 0501315198 evenly. Misalignment can cause premature failure.
Check Shaft Surface Finish: Ensure the mating shaft is smooth, free of burrs, scratches, or corrosion. Even minor imperfections can compromise the seal and lead to leaks.
Packaging & Shipping
By Express : Suitable for sample order or <50 KG Fast:3-10 days High shipping cost Door to door service
By Air : Suitable for >50 KG Fast: 3-7 days Lower than express cost Airport to airport service
By Sea: Suitable for >300 KG Lower cost port to port service
As a leading supplier and dealer of ZF parts, we provide genuine components to maintain the integrity and efficiency of your gearbox system. Trust in our expertise and quality assurance to keep your ZF gearbox running smoothly.
| Installation Tips | Surface prep: Degrease with ZF Cliclean 3 solvent； Gasket application: Use Loctite 518 in continuous 1.5mm bead；； Alignment: Install using factory alignment pins (ZF tool B40 5003 recommended)；； Torque sequence:Initial: 12Nm star pattern—–Final: 28Nm + 90° angle torque；；；； Post-install: Pressure test at 2.5 bar before fluid fill |
|---|
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.