ZF 0501316322 GASKET – Genuine ZF Transmission Seal Premium ZF Parts Dealer & Supplier
- 24/7 order processing with DHL/FedEx express options.
- In-stock availability for urgent repairs.
- Free technical guidance on installation and compatibility
- P/N:0501316322
ZF 0501316322 GASKET – Reliable Sealing Solution for ZF Gearbox Systems
As a certified ZF parts supplier and trusted ZF parts dealer, we deliver only authentic ZF components engineered to meet rigorous OEM standards. The ZF 0501316322 GASKET is a precision-engineered sealing component used in ZF transmission systems to ensure leak-free operation under high pressure and extreme temperatures.
Product Overview
| Feature | Specification |
|---|---|
| Part Number | 0501316322 |
| Manufacturer | ZF Friedrichshafen AG |
| Part Type | Formed-in-Place or Pre-Cut Gasket (GASKET) |
| Material | Nitrile Rubber (NBR) / Fiber-Reinforced Composite |
| Thickness | 1.5 mm |
| Temperature Range | -40°C to +180°C |
| Compatibility | ZF 6HP, 8HP, Ecomat 4, AS Tronic, TraXon Series |
| Application | Gearbox Cover, Extension Housing, Breather Port |
| Fluid Resistance | Resistant to ZF Lifeguard 5, 6, and Mercon LV fluids |
| Sealing Performance | Oil-tight up to 3 bar dynamic pressure |
| Certification | ISO 9001, IATF 16949, OE Original Equipment Match |
Installation Tip:
✅ Before Installation:
- Remove old gasket residue completely using a plastic scraper — avoid metal tools that can damage sealing surfaces.
- Clean both mating surfaces with brake cleaner or isopropyl alcohol; ensure dry and oil-free before installation.
✅ During Assembly:
- Position the ZF 0501316322 GASKET precisely — no misalignment or stretching.
- Apply even torque when tightening bolts (typically 8–10 Nm) in a crisscross pattern to prevent warping or leaks.
- Do not use additional sealants unless specified by ZF — many modern ZF gaskets are pre-coated and ready-to-use.
✅ After Installation:
- Refill with ZF-approved transmission fluid (e.g., ZF Lifeguard 6).
- Run the engine at idle for 2–3 minutes, then check for any seepage after warm-up.
Packaging & Shipping
By Express : Suitable for sample order or <50 KG Fast:3-10 days High shipping cost Door to door service
By Air : Suitable for >50 KG Fast: 3-7 days Lower than express cost Airport to airport service
By Sea: Suitable for >300 KG Lower cost port to port service
As a leading supplier and dealer of ZF parts, we provide genuine components to maintain the integrity and efficiency of your gearbox system. Trust in our expertise and quality assurance to keep your ZF gearbox running smoothly.
| Installation Tips | Surface prep: Degrease with ZF Cliclean 3 solvent； Gasket application: Use Loctite 518 in continuous 1.5mm bead；； Alignment: Install using factory alignment pins (ZF tool B40 5003 recommended)；； Torque sequence:Initial: 12Nm star pattern—–Final: 28Nm + 90° angle torque；；；； Post-install: Pressure test at 2.5 bar before fluid fill |
|---|
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Genuine ZF Aftermarket Input Shaft for ZF Transmissions (57 Teeth, Part No. 0091202040)
SKU:
0091202040
This ZF Aftermarket Genuine Input Shaft (Part No. 0091202040, 57 Teeth) is engineered for ZF Transmissions, delivering precise torque transfer and exceptional durability in heavy-duty applications. Manufactured to ZF’s OEM standards, it ensures seamless compatibility with ZF drivetrain systems and optimal performance under high-stress conditions. Available globally through ZF’s authorized parts dealers and suppliers, with expedited shipping and technical support
ZF Transmission Spare Part 0091 304 219 – Genuine OEM ZF Part
SKU:
0091304219