ZF 0750145018 FLANGE – Genuine ZF Transmission Output Flange Trusted ZF Parts Dealer & Supplier
- 24/7 order processing with DHL/FedEx express options.
- In-stock availability for urgent repairs.
- Free technical guidance on installation and compatibility
- P/N:0750145018
ZF 0750145018 FLANGE – Durable Output Flange for ZF Gearbox Systems
As a certified ZF parts supplier and professional ZF parts dealer, we deliver only original ZF components engineered to meet strict OEM standards. The ZF 0750145018 FLANGE is a precision-machined output flange used in ZF automated and manual transmissions, designed to securely connect the gearbox to the driveshaft in commercial vehicles, buses, and heavy-duty machinery.
Product Overview
| Feature | Specification |
|---|---|
| Part Number | 0750145018 |
| Manufacturer | ZF Friedrichshafen AG |
| Part Type | Output Flange (FLANGE) |
| Material | Forged Alloy Steel with Zinc-Nickel Coating |
| Bolt Circle (PCD) | 195 mm (6-hole pattern) |
| Number of Holes | 6 x M14 threaded holes |
| Shaft Diameter | 38 mm splined input shaft (36 teeth) |
| Sealing Surface | Precision-ground for oil seal contact |
| Compatibility | ZF AS Tronic, TraXon, Ecomat 4, 6HP/8HP Series |
| Application | Rear Output Housing Connection |
| Torque Rating | Up to 2,000 Nm continuous |
| Certification | ISO 9001, IATF 16949, OE Original Equipment Match |
Installation Tip:
✅ Before Installation:
- Inspect the output shaft and splines for wear, burrs, or corrosion. Clean thoroughly before mounting the flange.
- Check the condition of the oil seal — replace if cracked or leaking to prevent future fluid loss.
✅ During Assembly:
- Align the splines carefully when sliding the flange onto the output shaft — never force it.
- Use new high-tensile bolts (M14) and tighten in a star pattern to ensure even load distribution.
- Recommended torque: 180–200 Nm (refer to vehicle-specific workshop manual).
✅ After Installation:
- Visually inspect for clearance between flange and driveshaft yoke. Ensure no binding occurs during rotation.
- Start engine and check for vibrations or unusual noises under low load.
Packaging & Shipping
By Express : Suitable for sample order or <50 KG Fast:3-10 days High shipping cost Door to door service
By Air : Suitable for >50 KG Fast: 3-7 days Lower than express cost Airport to airport service
By Sea: Suitable for >300 KG Lower cost port to port service
As a leading supplier and dealer of ZF parts, we provide genuine components to maintain the integrity and efficiency of your gearbox system. Trust in our expertise and quality assurance to keep your ZF gearbox running smoothly.
| Installation Tips | Surface prep: Degrease with ZF Cliclean 3 solvent； Gasket application: Use Loctite 518 in continuous 1.5mm bead；； Alignment: Install using factory alignment pins (ZF tool B40 5003 recommended)；； Torque sequence:Initial: 12Nm star pattern—–Final: 28Nm + 90° angle torque；；；； Post-install: Pressure test at 2.5 bar before fluid fill |
|---|
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Genuine ZF Aftermarket Input Shaft for ZF Transmissions (57 Teeth, Part No. 0091202062)
SKU:
0091202062
This ZF Aftermarket Input Shaft (Part No. 0091202062, 57 Teeth) is precision-engineered for ZF Transmissions, ensuring OEM-standard durability and seamless integration with ZF TraXon, Ecolife, and AS Tronic systems. Manufactured with ZF-certified chromium-molybdenum steel and heat-treated for high torque capacity (up to 2,500 Nm), it guarantees reliability in heavy-duty applications. Supported by ZF’s global network of 650+ service centers and 100,000+ parts inventory, offering expedited delivery and technical expertise