ZF 0091307304 DRIVE SHAFT – Genuine ZF Transmission Output Shaft Trusted ZF Parts Dealer & Supplier
- 24/7 order processing with DHL/FedEx express options.
- In-stock availability for urgent repairs.
- Free technical guidance on installation and compatibility
- P/N:0091307304
ZF 0091307304 DRIVE SHAFT – Heavy-Duty Output Shaft for ZF Automated Transmissions
As a certified ZF parts supplier and professional ZF parts dealer, we deliver only original ZF components engineered to meet strict OEM specifications. The ZF 0091307304 DRIVE SHAFT is a critical transmission output shaft used in ZF automated manual and automatic gearboxes, including the AS Tronic, TraXon, and 8HP series, commonly found in commercial trucks, buses, and heavy-duty vehicles.
Choose precision. Choose authenticity. Choose us — your reliable ZF parts dealer.
Product Overview
| Feature | Specification |
|---|---|
| Part Number | 0091307304 |
| Manufacturer | ZF Friedrichshafen AG |
| Component Type | Transmission Drive Shaft (Output/Main Shaft) |
| Material | Forged Alloy Steel (20CrMo5 / 16MnCr5), Heat-Treated |
| Hardening Process | Induction Hardened Splines |
| Length (Approx.) | 320 mm |
| Outer Diameter | 68 mm (main body) |
| Splines (Output End) | 36 Teeth, MOD 2.5 |
| Input Side Compatibility | Matches planetary carrier or final drive gear |
| Balance Grade | G6.3 (ISO 1940) – Precision Dynamic Balance |
| Compatibility Models | ZF AS Tronic, TraXon, 8HP Series Transmissions |
| Application | Rear Axle Torque Transfer in Commercial Vehicles |
Installation Tip:
✅ Before Installation:
- Inspect the bearing bores, counter shafts, and gear meshing surfaces for wear or scoring. Replace damaged components before installing the new shaft.
- Clean all metal debris from the transmission housing — use a magnet and lint-free cloth.
✅ During Assembly:
- Lubricate splines lightly with ZF-approved assembly paste or transmission oil to prevent galling.
- Slide the ZF 0091307304 DRIVE SHAFT into place smoothly — never force it. Misalignment can damage seals or gears.
- Secure with correct retaining rings or bolts as per ZF workshop manual.
✅ After Installation:
- Rotate the input shaft manually to check for binding or abnormal resistance.
- Refill with ZF Lifeguard 6 fluid before test run.
Packaging & Shipping
By Express : Suitable for sample order or <50 KG Fast:3-10 days High shipping cost Door to door service
By Air : Suitable for >50 KG Fast: 3-7 days Lower than express cost Airport to airport service
By Sea: Suitable for >300 KG Lower cost port to port service
As a leading supplier and dealer of ZF parts, we provide genuine components to maintain the integrity and efficiency of your gearbox system. Trust in our expertise and quality assurance to keep your ZF gearbox running smoothly.
| Installation Tips | Surface prep: Degrease with ZF Cliclean 3 solvent； Gasket application: Use Loctite 518 in continuous 1.5mm bead；； Alignment: Install using factory alignment pins (ZF tool B40 5003 recommended)；； Torque sequence:Initial: 12Nm star pattern—–Final: 28Nm + 90° angle torque；；；； Post-install: Pressure test at 2.5 bar before fluid fill |
|---|
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Genuine ZF Aftermarket Input Shaft for ZF Transmissions (57 Teeth, Part No. 0091202033)
SKU:
0091202033
This ZF Aftermarket Genuine Input Shaft (Part No. 0091202033, 57 Teeth) is designed for ZF Transmissions, ensuring precise torque transfer and durability in heavy-duty applications. Manufactured to ZF’s OEM standards, it guarantees seamless compatibility with ZF drivetrain systems and optimal performance under high-stress conditions. Available globally through ZF’s authorized parts dealers and suppliers, with expedited shipping and technical support