catégories de produits
- Pièces de boîte de vitesses Eaton 11
- Pièces de boîte de vitesses HINO 4
- MAN ZF 59
- DAF ZF 131
- ZF 4WG180 4WG200 253
- Pièces de rechange de boîte de vitesses ZF 8S109 9S109 16S109 36
- ZF Part 344
- Pièces de rechange ZF 16S2220 20
- Pièces de rechange ZF 9S1110/9S1310 24
- Pièces de rechange de boîte de vitesses ZF 16S1650 10
- Pièces ZF pour 16S151 16S181 16S221 16S251 16S130 16S160 16S190 16K130 16K160 16K190 38
- Pièces de boîte de vitesses pour Mercedes-Benz G6/60,G6/85 48
Mots clés du produit
Messages récents
Genuine ZF Input Shaft 33 Dents (33T) for Ecosplit Transmissions – Partie no. 1272298903
- 24/7 Traitement des commandes avec les options DHL / FedEx Express.
- Disponibilité en stock pour les réparations urgentes.
- Conseils techniques gratuits sur l'installation et la compatibilité
- P / n:1272298903
Genuine ZF Input Shaft 33 Dents (33T) for Ecosplit Transmissions – Partie no. 1272298903


Spécifications techniques
Le Arbre d'entrée ZF (Partie no. 1272298903) is a critical driveline component designed to transfer engine power directly into the transmission system. Engineered specifically for the ZF Ecosplit (16S series), this shaft features a 33-tooth (33T) gear profile, precision-cut to minimize noise and maximize torque efficiency.
| Fonctionnalité | Technical Data |
| Marque | ZF (Genuine OEM) |
| Nom de la pièce | Arbre d'entrée (Drive Shaft) |
| Numéro de pièce (P/N) | 1272298903 / 1272 298 903 |
| Nombre de dents | 33 Dents (33T) |
| Application | ZF Ecosplit 1, 2, & 3 (16S151, 16S181, 16S221) |
| Matériel | Case-Hardened Steel (20MnCr5 or equivalent) |
| Poids | 7.80 kg |
| Finition de surface | Precision Ground & Polished |
| Spline Type | High-Torque Multi-Spline Profile |
Simple Install Tips
Pilot Bearing Inspection: Always replace the pilot bearing in the flywheel when installing a new input shaft. A worn bearing will cause the shaft to vibrate, leading to rapid wear of the 1272298903 splines.
Verify Spline Fit: Before final assembly, slide the clutch disc onto the new input shaft to ensure the splines match perfectly without binding.
Oil Seal Replacement: Never reuse the old input shaft oil seal. Install a new ZF-certified radial oil seal to prevent transmission fluid from leaking into the clutch housing.
Check Input Pocket Bearing: Inspect the bearing located at the back of the input shaft (where it connects to the main shaft). If there is any pitting or discoloration, replace it immediately to avoid catastrophic shaft failure.
Grease Sparingly: Apply a very light coat of high-temperature lithium grease to the splines. Excess grease can fly off onto the clutch plate, causing clutch slippage.
Emballage & Expédition
Par Express : Convient pour une commande d'échantillon ou <50 KG Rapide:3-10 jours Coût d'expédition élevé Service porte à porte
Par avion : Convient à >50 KG Rapide: 3-7 jours Inférieur au coût express Service aéroport à aéroport
Par la mer: Convient à >300 KG Service port à port à moindre coût


En tant que principal fournisseur et revendeur de pièces ZF, nous fournissons des composants d'origine pour maintenir l'intégrité et l'efficacité de votre système de boîte de vitesses. Faites confiance à notre expertise et à notre assurance qualité pour assurer le bon fonctionnement de votre boîte de vitesses ZF.
Contactez-nous
En attente de votre email, nous vous répondrons dans les 12 heures avec des informations précieuses dont vous aviez besoin.

