ZF Part 1269328254 Synchronizer Ring for Ecosplit Transmission Genuine Heavy-Duty Spare
- 24/7 order processing with DHL/FedEx express options.
- In-stock availability for urgent repairs.
- Free technical guidance on installation and compatibility
- P/N:1269328254
ZF Part 1269328254 Synchronizer Ring for Ecosplit Transmission | Genuine Heavy-Duty Spare
Technical Specification
The ZF Synchronizer Ring 1269328254 is a high-precision friction component essential for the synchronization process in heavy-duty manual transmissions. Specifically designed for the ZF Ecosplit series, this ring ensures that the rotational speeds of the transmission gear and the sliding sleeve are perfectly matched before engagement.
| Attribute | Detail |
| Brand | ZF Friedrichshafen AG |
| Part Number | 1269328254 / 1269.328.254 |
| Component Category | Synchronizer Ring (Baulk Ring) |
| Transmission Compatibility | ZF Ecosplit (16S151, 16S181, 16S221, 16S251) |
| Vehicle Application | Heavy-Duty Trucks (MAN, DAF, IVECO, Renault, BMC) |
| Material | Special Forged Brass/Steel with Friction Lining |
| Weight | 0.42 kg |
| Standard | OEM Genuine Quality |
Simple Install Tips
For professional installation of the ZF 1269328254, follow these technical recommendations to prevent premature failure:
The “Gap” Test: Before assembly, place the ring on the gear cone and measure the clearance (Value A) using a feeler gauge. If the clearance is below the ZF-specified wear limit (typically < 0.8mm), synchronization will fail.
Oil Immersion: Never install a synchronizer ring dry. Soak the ring in the approved ZF-Ecofluid M or recommended gear oil for at least 20 minutes before fitting to ensure the friction lining is fully lubricated.
Inspect the Taper: Check the mating gear taper for “glazing” or blue heat spots. If the gear taper is too smooth or damaged, the new 1269328254 ring will not be able to create enough friction to stop the gear.
Keyway Alignment: Ensure the three notches on the outer diameter of the ring align perfectly with the synchronizer keys (struts) in the hub. Misalignment during pressing will crack the ring.
Clean Environment: Ensure the gearbox housing is free of metal shavings. Small particles can embed themselves in the synchronizer’s friction material, leading to rapid wear and “notchy” shifting.
Packaging & Shipping
By Express : Suitable for sample order or <50 KG Fast:3-10 days High shipping cost Door to door service
By Air : Suitable for >50 KG Fast: 3-7 days Lower than express cost Airport to airport service
By Sea: Suitable for >300 KG Lower cost port to port service
As a leading supplier and dealer of ZF parts, we provide genuine components to maintain the integrity and efficiency of your gearbox system. Trust in our expertise and quality assurance to keep your ZF gearbox running smoothly.
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Genuine ZF Aftermarket Adapted Input Shaft for ZF Transmissions (57 Teeth, Part No. 0091202034)
SKU:
0091202034
This ZF Aftermarket Genuine Adapted Input Shaft (Part No. 0091202034, 57 Teeth) is engineered for ZF Transmissions, ensuring precise torque transfer and durability in heavy-duty applications. Manufactured to ZF’s OEM standards, it guarantees seamless compatibility with ZF drivetrain systems and optimal performance under high-stress conditions. Available globally through ZF’s authorized parts dealers and suppliers, with expedited shipping and technical support
Genuine ZF Aftermarket Input Shaft for ZF Transmissions (57 Teeth, Part No. 0091202055)
SKU:
0091202055
This ZF Aftermarket Input Shaft (Part No. 0091202055, 57 Teeth) is engineered for ZF Transmissions, delivering OEM-standard precision and durability in heavy-duty applications. Manufactured with ZF-certified chromium-molybdenum steel and heat-treated for enhanced load capacity (up to 2,500 Nm), it ensures seamless compatibility with ZF TraXon, Ecolife, and AS Tronic systems. Globally available through ZF’s network of 650+ service centers and 100,000+ parts inventory, with expedited shipping and technical support
Genuine ZF Aftermarket Input Shaft for ZF Transmissions (57 Teeth, Part No. 0091202062)
SKU:
0091202062
This ZF Aftermarket Input Shaft (Part No. 0091202062, 57 Teeth) is precision-engineered for ZF Transmissions, ensuring OEM-standard durability and seamless integration with ZF TraXon, Ecolife, and AS Tronic systems. Manufactured with ZF-certified chromium-molybdenum steel and heat-treated for high torque capacity (up to 2,500 Nm), it guarantees reliability in heavy-duty applications. Supported by ZF’s global network of 650+ service centers and 100,000+ parts inventory, offering expedited delivery and technical expertise