ZF 0501314246 SHEET GASKET – Genuine ZF Gearbox Seal Trusted ZF Parts Dealer & Supplier
- 24/7 order processing with DHL/FedEx express options.
- In-stock availability for urgent repairs.
- Free technical guidance on installation and compatibility
- P/N:0501314246
ZF 0501314246 SHEET GASKET – Precision Sealing for ZF Gearboxes
As a trusted ZF parts dealer and authorized ZF parts supplier, we provide only genuine ZF components engineered for maximum reliability in demanding transmission environments. The ZF 0501314246 SHEET GASKET is a critical sealing component used in ZF manual, automated, and heavy-duty gearboxes to prevent oil leaks and maintain internal pressure integrity.
Product Overview
| Feature | Specification |
|---|---|
| Part Number | 0501314246 |
| Manufacturer | ZF Friedrichshafen AG |
| Part Type | Sheet Gasket (SHELF GASKET) |
| Material | Multi-Layer Elastomer-Coated Fiber Composite |
| Thickness | 1.2 mm |
| Temperature Range | -40°C to +180°C |
| Compatibility | ZF 6HP, 8HP, Ecomat 2/3/4 Series, AS Tronic, TraXon |
| Sealing Function | Gearbox Housing Joint, Extension Housing, Side Cover |
| Fluid Resistance | Fully compatible with ZF Lifeguard Fluids |
| Certification | ISO 9001, TS 16949, OE Approved |
Installation Tip:
✅ Before Installation:
- Thoroughly clean both mating surfaces (gearbox case and cover). Remove old gasket residue, oil, and debris with a non-abrasive solvent.
- Inspect for warping or damage on flange surfaces — even minor distortion can cause leaks.
✅ During Assembly:
- Place the ZF 0501314246 SHEET GASKET flat without stretching or twisting.
- Apply even pressure when tightening bolts; follow ZF-recommended torque sequence (star pattern) to avoid uneven compression.
- Torque spec: Typically 8–10 Nm (confirm with vehicle-specific manual).
✅ After Installation:
- Refill with ZF-approved transmission fluid (e.g., ZF Lifeguard 6 or equivalent).
- Run engine briefly and check for leaks at operating temperature.
Packaging & Shipping
By Express : Suitable for sample order or <50 KG Fast:3-10 days High shipping cost Door to door service
By Air : Suitable for >50 KG Fast: 3-7 days Lower than express cost Airport to airport service
By Sea: Suitable for >300 KG Lower cost port to port service
As a leading supplier and dealer of ZF parts, we provide genuine components to maintain the integrity and efficiency of your gearbox system. Trust in our expertise and quality assurance to keep your ZF gearbox running smoothly.
| Installation Tips | Surface prep: Degrease with ZF Cliclean 3 solvent； Gasket application: Use Loctite 518 in continuous 1.5mm bead；； Alignment: Install using factory alignment pins (ZF tool B40 5003 recommended)；； Torque sequence:Initial: 12Nm star pattern—–Final: 28Nm + 90° angle torque；；；； Post-install: Pressure test at 2.5 bar before fluid fill |
|---|
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Genuine ZF Aftermarket Input Shaft for ZF Transmissions (57 Teeth, Part No. 0091202040)
SKU:
0091202040
This ZF Aftermarket Genuine Input Shaft (Part No. 0091202040, 57 Teeth) is engineered for ZF Transmissions, delivering precise torque transfer and exceptional durability in heavy-duty applications. Manufactured to ZF’s OEM standards, it ensures seamless compatibility with ZF drivetrain systems and optimal performance under high-stress conditions. Available globally through ZF’s authorized parts dealers and suppliers, with expedited shipping and technical support