ZF genuíno 0735320799 Needle Bearing 88x96x23mm Transmission Roller Bearing ZF Parts Dealer

ZF genuíno 0735320799 Needle Bearing 88x96x23mm | Transmission Roller Bearing | Revendedor de peças ZF

‌Visão geral do produto‌

Reduce Friction & Ensure Smooth Operation with Genuine ZF Precision

Esse ZF genuíno 0735320799 Rolamento da agulha is a high-precision roller bearing with dimensions of 88x96x23mm, manufactured to ZF’s original equipment specifications. As a trusted Fornecedor de peças ZF e Revendedor de peças ZF, we provide this critical OEM component to ensure your transmission operates with minimal friction, optimal efficiency, and maximum longevity.

Needle bearings are essential for supporting rotating shafts and components within your ZF gearbox. They handle high radial loads while minimizing friction in compact spaces. A worn or damaged bearing can lead to whining noises, vibration, metal contamination in the fluid, and catastrophic transmission failure. This authentic ZF bearing guarantees the exact dimensions, load capacity, and durability required for a reliable repair.

Key Benefits of OEM:

• Engenharia de Precisão: Manufactured to exact OEM dimensions (88x96x23mm) for a perfect fit and optimal performance.

• Reduced Friction: Needle roller design minimizes power loss and heat generation, improving efficiency.

• High Load Capacity: Designed to handle the significant radial loads present in automotive transmissions.

• Durabilidade: Made from high-grade steel and precision-ground to ensure long service life under extreme conditions.

• Guaranteed Compatibility: Designed specifically for your ZF transmission model, ensuring perfect alignment and function.

Especificação técnica

Compatibilidade: This specific needle bearing is used in several ZF automatic transmission models. Accurate identification of your transmission model (Por exemplo, ZF 6HP21, ZF 8HP55) is essential before purchase.

Dica simples de instalação

Professional Advisory: Bearing installation requires specific tools and knowledge. Improper installation will destroy the new bearing and damage the transmission case.

1. Cleanliness: The work area and all components must be impeccably clean. Any dirt will damage the new bearing.

2. Remove Old Bearing: Use the proper bearing puller or slide hammer tools to carefully remove the old bearing. Do not hammer on the transmission case.

3. Clean the Bore: Thoroughly clean the housing bore where the new bearing will be pressed. Remove any burrs or old material. Verify the bore is smooth and undamaged.

4. Correct Orientation: Note the correct orientation of the bearing before removal. The new bearing must be installed in the same direction.

5. Proper Installation Tool: Use a bearing driver set or a appropriately sized socket that contacts only the outer race of the bearing. Never apply force to the inner race or the needle rollers.

6. Press into Place: Carefully and evenly press the new genuine ZF bearing into its bore until it is fully seated. Ensure it goes in straight to avoid cocking or binding.

7. Final Check: After installation, ensure the bearing rotates freely and that the associated shaft or gear fits correctly without binding.

Warning: Never re-use an old bearing. Always replace with a genuine ZF part. Never hammer directly on the bearing during installation.

Embalagem & Envio

Por Expresso : Adequado para pedido de amostra ou <50 KG rápido:3-10 dias Alto custo de envio Serviço porta a porta
Pelo ar : Adequado para >50 KG rápido: 3-7 dias Menor que o custo expresso Serviço de aeroporto para aeroporto
Pelo mar: Adequado para >300 KG Serviço porto a porto de menor custo

Como fornecedor e revendedor líder de peças ZF, fornecemos componentes originais para manter a integridade e a eficiência do seu sistema de caixa de velocidades. Confie na nossa experiência e garantia de qualidade para manter a sua caixa de velocidades ZF a funcionar sem problemas.