Genuine ZF Part 1238 304 394 – Раздвижной блок

  • 24/7 Обработка заказов с помощью опций DHL/FedEx Express.
  • Доступность в срочном ремонте.
  • Бесплатное техническое руководство по установке и совместимости
  • ‌P/n:1238 304 394

Genuine ZF Part 1238 304 394 – Раздвижной блок


Обзор продукта

The ZF часть 1238 304 394 is a high-wear sliding block (also known as a shift fork pad), a vital component among critical Запчасти для коробки передач ZF. This small but essential part is responsible for ensuring smooth, precise, and quiet gear selection by acting as an interface between the shift fork and the synchronizer sleeve.

Compromised or worn sliding blocks are a common cause of gear grinding, difficult shifting, and transmission noise. Replacing it with this genuine ZF часть guarantees a perfect fit and restores the transmission’s original shifting quality. For ZF parts dealers and professional mechanics, sourcing this component from a reliable ZF поставщики деталей is key to delivering lasting repairs. This OEM sliding block is manufactured from a special, low-friction composite material designed for maximum durability and performance under constant load.

Simple Installation Guide for ZF Sliding Block 1238 304 394

Transmission work is complex. Always refer to the official ZF service manual. This task requires disassembling the transmission and should be performed by a qualified technician.

  1. Transmission Removal: Safely remove the transmission from the vehicle and place it on a workbench.

  2. Case Disassembly: Carefully separate the transmission case to gain access to the internal shift mechanism.

  3. Locate and Remove: Identify the worn sliding block on the shift fork. It is typically held in place by a clip or a pin. Note its orientation before removal.

  4. Clean and Inspect: Thoroughly clean the shift fork contact area. Inspect the fork itself for any wear or damage.

  5. Install New Block: Press the new genuine ZF sliding block (1238 304 394) into place on the shift fork, ensuring it is securely seated and oriented correctly.

  6. Reassemble: Reassemble the transmission following the service manual’s reverse procedure, paying close attention to torque specifications.


Упаковка & Перевозки

Экспресс : Подходит для заказа образца или <50 КГ Фаст:3-10 дней Высокая стоимость доставки Услуга «от двери до двери»
Самолетом : Подходит для >50 КГ Фаст: 3-7 дней Ниже, чем стоимость экспресс-доставки из аэропорта в аэропорт
Морем: Подходит для >300 KG Более низкая стоимость обслуживания от порта к порту

 

Как ведущий поставщик и дилер запчастей ZF., мы поставляем оригинальные компоненты для поддержания целостности и эффективности вашей системы коробки передач.. Доверьтесь нашему опыту и обеспечению качества, чтобы обеспечить бесперебойную работу вашей коробки передач ZF..

‌ Установите советы

Поверхностная подготовка: Обезживание с ZF Cliclean 3 растворитель; Применение прокладки: Используйте loctite 518 в непрерывной 1,5 -мм бусине;; Выравнивание: Установить с использованием заводских выравнивания (ZF Tool B40 5003 рекомендуется);; Последовательность крутящего момента:Исходный: 12NM Star Pattern—–Финал: 28Н.м. + 90° Угольный крутящий момент;;;; После установки: Тест на давление в 2.5 бар перед заполнением жидкости

Связаться с нами

Жду вашего письма, мы ответим вам в течение 12 часы с ценной информацией, которая вам нужна.

СОПУТСТВУЮЩИЕ ТОВАРЫ

Запросить цену

Заполните форму запроса ценового предложения, и мы ответим на ваше сообщение как можно скорее.!