Подлинный ZF 0735320799 Needle Bearing 88x96x23mm Transmission Roller Bearing ZF Parts Dealer

Подлинный ZF 0735320799 Needle Bearing 88x96x23mm | Transmission Roller Bearing | ZF Запчасти дилер

‌Обзор продукта‌

Reduce Friction & Ensure Smooth Operation with Genuine ZF Precision

This Подлинный ZF 0735320799 Игольчатый подшипник is a high-precision roller bearing with dimensions of 88x96x23mm, manufactured to ZF’s original equipment specifications. As a trusted ZF поставщики деталей и ZF Запчасти дилер, we provide this critical OEM component to ensure your transmission operates with minimal friction, optimal efficiency, and maximum longevity.

Needle bearings are essential for supporting rotating shafts and components within your ZF gearbox. They handle high radial loads while minimizing friction in compact spaces. A worn or damaged bearing can lead to whining noises, vibration, metal contamination in the fluid, and catastrophic transmission failure. This authentic ZF bearing guarantees the exact dimensions, load capacity, and durability required for a reliable repair.

Key Benefits of OEM:

• Precision Engineering: Manufactured to exact OEM dimensions (88x96x23mm) for a perfect fit and optimal performance.

• Reduced Friction: Needle roller design minimizes power loss and heat generation, improving efficiency.

• High Load Capacity: Designed to handle the significant radial loads present in automotive transmissions.

• Durability: Made from high-grade steel and precision-ground to ensure long service life under extreme conditions.

• Гарантированная совместимость: Спроектирован специально для вашей модели передачи ZF, ensuring perfect alignment and function.

Техническая спецификация

Совместимость: This specific needle bearing is used in several ZF automatic transmission models. Accurate identification of your transmission model (НАПРИМЕР., ZF 6HP21, ZF 8HP55) is essential before purchase.

Простой установка

Professional Advisory: Bearing installation requires specific tools and knowledge. Improper installation will destroy the new bearing and damage the transmission case.

1. Cleanliness: The work area and all components must be impeccably clean. Any dirt will damage the new bearing.

2. Remove Old Bearing: Use the proper bearing puller or slide hammer tools to carefully remove the old bearing. Do not hammer on the transmission case.

3. Clean the Bore: Thoroughly clean the housing bore where the new bearing will be pressed. Remove any burrs or old material. Verify the bore is smooth and undamaged.

4. Correct Orientation: Note the correct orientation of the bearing before removal. The new bearing must be installed in the same direction.

5. Proper Installation Tool: Use a bearing driver set or a appropriately sized socket that contacts only the outer race of the bearing. Never apply force to the inner race or the needle rollers.

6. Press into Place: Carefully and evenly press the new genuine ZF bearing into its bore until it is fully seated. Ensure it goes in straight to avoid cocking or binding.

7. Final Check: After installation, ensure the bearing rotates freely and that the associated shaft or gear fits correctly without binding.

Предупреждение: Never re-use an old bearing. Always replace with a genuine ZF part. Never hammer directly on the bearing during installation.

Упаковка & Перевозки

Экспресс : Подходит для заказа образца или <50 КГ Фаст:3-10 дней Высокая стоимость доставки Услуга «от двери до двери»
Самолетом : Подходит для >50 КГ Фаст: 3-7 дней Ниже, чем стоимость экспресс-доставки из аэропорта в аэропорт
Морем: Подходит для >300 KG Более низкая стоимость обслуживания от порта к порту

Как ведущий поставщик и дилер запчастей ZF., мы поставляем оригинальные компоненты для поддержания целостности и эффективности вашей системы коробки передач.. Доверьтесь нашему опыту и обеспечению качества, чтобы обеспечить бесперебойную работу вашей коробки передач ZF..