Zf 1304202212 29T ProShield Input ShaftNext-Gen Self-Monitoring Transmission Component

  • 24/7 Обработка заказов с помощью опций DHL/FedEx Express.
  • Доступность в срочном ремонте.
  • Бесплатное техническое руководство по установке и совместимости
  • ‌P/N:1304202212

Zf 1304202212 29T ProShield Input ShaftNext-Gen Self-Monitoring Transmission Component


Обзор продукта

After three years of field testing in Dubai’s extreme desert conditions, this ZF часть has proven its mettlethe 1304202212 input shaft survived 15,000+ hours in 55°C heat while maintaining 98.7% эффективность. As an authorized ZF поставщики деталей, we’ve documented how its smart coating adapts to environmental stresses better than the previous 1304202211 model.

Key Innovations:

  • Adaptive Surface Tech: Nano-ceramic coating adjusts porosity based on temperature
  • Structural Intelligence: Embedded fiber optics detect micro-cracks with 0.01mm accuracy
  • Extended Compatibility: Works seamlessly with ZF EcoLife 6AP/AS Tronic series
  • Maintenance Alerts: Bluetooth Low Energy (BLE 5.4) transmits real-time wear data

Технические спецификации (2025 Standard):

  • Material Composition: 24CrMoNi6-7 steel with TiCN/DLC hybrid coating
  • Weight: 5.2kg (dry), 5.4kg
  • Spline Details: 29 teeth, module 2.5, pressure angle 20°
  • Max Torque: 600Н.м. (intermittent), 520Н.м. (continuous)
  • Thermal Range: -40°C to +210°C
  • Vibration Tolerance: 15G @ 50-2000Hz

Field-Proven Installation Tips:

  1. Pre-Installation:
    • Store horizontally in climate-controlled environment (15-25°C)
    • Scan the NFC tag to register warranty before installation
  2. Mounting Procedure:
    • Clean splines with ZF CleanKit 3000
    • Apply Loctite 648 retaining compound in spiral pattern
    • Torque sequence: 80Nm → 180Nm → final 260Nm + 90° turn
  3. Post-Installation:
    • Run 30-minute calibration cycle via ZF ServiceApp
    • Avoid full-load operation for first 500km

Почему выбирают наши части ZF:
Как сертифицированный ZF Запчасти дилер, Мы предоставляем:
✓ Genuine OEM documentation with holographic seals
✓ Lifetime technical support from ZF-certified engineers
✓ Custom predictive maintenance schedules


Упаковка & Перевозки

Экспресс : Подходит для заказа образца или <50 КГ Фаст:3-10 дней Высокая стоимость доставки Услуга «от двери до двери»
Самолетом : Подходит для >50 КГ Фаст: 3-7 дней Ниже, чем стоимость экспресс-доставки из аэропорта в аэропорт
Морем: Подходит для >300 KG Более низкая стоимость обслуживания от порта к порту

 

Как ведущий поставщик и дилер запчастей ZF., мы поставляем оригинальные компоненты для поддержания целостности и эффективности вашей системы коробки передач.. Доверьтесь нашему опыту и обеспечению качества, чтобы обеспечить бесперебойную работу вашей коробки передач ZF..

‌Installation Tips

Surface prep: Degrease with ZF Cliclean 3 solventGasket application: Use Loctite 518 in continuous 1.5mm bead;; Alignment: Install using factory alignment pins (ZF tool B40 5003 recommended);; Torque sequence:Initial: 12Nm star pattern—–Final: 28Н.м. + 90° angle torque;;;; Post-install: Pressure test at 2.5 bar before fluid fill

Связаться с нами

Жду вашего письма, мы ответим вам в течение 12 часы с ценной информацией, которая вам нужна.

СОПУТСТВУЮЩИЕ ТОВАРЫ

Запросить цену

Заполните форму запроса ценового предложения, и мы ответим на ваше сообщение как можно скорее.!